Posted by Lizzy Van Lysebeth on August 11th, 2009 in What's going on
I was referenced in the summer issue of the trade magazine Perspective of the International Interior Design Association (IIDA, www.iida.org). Some months ago they interviewed me (see post: Perpsective magazine) about health and safety within interior design in reference to the article I wrote on the subject for ID-Sphere: Health and safety in interior design
For people who like to read up on the article it is called The Power to Protect and was published in the summer issue of Perspective magazine.
Below I post the full content of the correspondence regarding the interview since only snapshots have been taken for the article.
I hope you enjoy.
Posted by Lizzy Van Lysebeth on August 1st, 2009 in Tutorials
Below you will find a 7 min tutorial I made on SLS (Selective Laser Sintering) a rapid prototyping process which builds models up in layers by lasering only the parts that need to be solidified. It is an affordable process to model up prototypes or forms which would be difficult to produce with standard manufacturing processes. SLS builds up your model in Nylon which results in a fairly strong object which leaves many possibilities for post processing and finishes such as lacquering or metal plating. The dimensions for an SLS build depends on the capacity of the machine that will build it so make sure you check these dimensions first.
The movie is 27MB so please be patient for it to load.
For more technical information on the process you can try these following links: